カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
---|---|---|---|---|---|
DIP/入力 | 低 | 認証済み | 未処理 | 2023-06-22 13:44 | 2023-06-29 14:11 |
テスター | Balthier | 担当者 |   | ソース | sega/segas32.cpp |
バージョン | 0.255 | 発生バージョン | 修正バージョン | ||
修正コミット | プルリク | ||||
フラグ | |||||
セット | alien3 and clones | ||||
セット詳細 |
alien3 - エイリアン3 ザ・ガン (海外版)
| ||||
概 要 | 照準マークを画面上から下に動かすと、サービスモードの値がFFを超えて00に戻る。 | ||||
詳 細 | When playing the game if you aim too high on the screen your crosshair will jump down to the very bottom of the screen and stay there until you go back down. Going into the tests in service mode show that the maximum ranges should be from 00 to FF, but pushing UP makes it roll over: Pushing left goes down from 80 to 00 and stops. Right goes up to FF and stops. Up goes up from 80 to FF and then rolls back to 00 and stops. Down goes down to 01 and stops, can't reach 00 here. Looking at the analogs settings in the UI, all of the inputs bars fill all the way up like normal when pressing them. I don't see any off center or suddenly emptying after maxxing out. | ||||
再現手順 | 1. Run alien3 2. Start a normal game and at some point aim all the way up the screen. 3. Go to service mode and test the inputs and even try to recalibrate and play again. Same results. | ||||
追加情報 | Attached a mp4 of the issue. Note to self: This site doesn't support webp or slightly big gifs. The manual says (under 8-4 GUN ADJUSTMENT):
https://www.arcade-museum.com/manuals-videogames/A/Alien%203%20The%20Gun%20Manual.pdf Related? When in the gun adjustment menu, if you press down first you'll see that it will stop at 01 for the bottom value shown, but if you press back all the way up, the top value will stay at FF and the bottom now says 00. I'm off to bed now. | ||||
添付ファイル | alien3.mp4 (2023-06-22 13:52) | ||||
alien3_gun_ranges.png (2023-06-22 13:56) |