| カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
|---|---|---|---|---|---|
 クラッシュ/フリーズ | 中 | 解決済み | 修正済み | 2021-10-16 01:01 | 2021-10-17 08:30 |
| テスター | r09 | 担当者 | AJR | ソース | apollo/apollo.cpp |
| バージョン | 0.236 | 発生バージョン | 0.234 | 修正バージョン | 0.237 |
| 修正コミット | 43e25e6 | プルリク | |||
| フラグ | |||||
| セット | dn3500 and clones | ||||
| セット詳細 |
 dn3500 - Apollo DN3500 | ||||
| 概 要 | テープからプログラムからロードできない。 | ||||
| 詳 細 | All Apollo machines hang forever when trying to load a program from tape, which makes it impossible to install the OS. This seems to be a regression, since versions before 0.234 worked fine. This also seems to prevent the OS from booting from HDD in newer versions once installed. | ||||
| 再現手順 | - Delete the dn3500 CFG and NVRAM files so the machine is in the default state - Run "mame dn3500 -ctape domainos" (needs the "domainos" set from the software list) - When the machine starts, press ENTER a few times until the "MD7C REV 8.00..." message appears - Run the command DI C - Run the command EX CONFIG - Wait approximately 7 minutes for the tape to load (can be fast-forwarded) On versions 0.233 and older, the configuration program appears (see screenshot for what it should look like) On versions 0.234 and newer, the machine never finishes loading the program. | ||||
| 追加情報 | |||||
| 添付ファイル |  dn3500_mame233.png (2021-10-16 01:01) | ||||