カテゴリ | 重要度 | ステータス | 解決状況 | 登録日時 | 最終更新 |
---|---|---|---|---|---|
DIP/入力 | 中 | 解決済み | 修正済み | 2008-02-29 13:22 | 2008-10-12 10:59 |
テスター | -Misc Reporters- | 担当者 | R. Belmont | ソース | namco/namcos22.cpp |
バージョン | 0.123u3 | 発生バージョン | 修正バージョン | 0.127u8 | |
修正コミット | プルリク | ||||
フラグ | 旧BugID | propcycl0123u2gra | |||
セット | propcycl | ||||
セット詳細 |
propcycl - プロップサイクル (海外版, PR2 Ver.A)
| ||||
概 要 | アナログ入力のロールオーバーに問題がある。 | ||||
詳 細 | The propcycle controls work fine for me except when they reach full right, they suddenly switch to hard left, and the same with up and down. I see the calibration screen alright. It appears to have only one function, adding a bias recorded by pressing the service button to the control inputs. That part works fine, but I think what I'm looking for is some way to limit the input range. If I move my mouse fully left, I get a base/value reading of 03F8/0200, as I slowly move the mouse right, it slowly drops to 0004/FE0C but at full right, it suddenly jumps to hard left 03FC/0204. | ||||
再現手順 | |||||
追加情報 | Posted by YoungSon | ||||
添付ファイル |