|DIP/入力||中||解決済み||修正済み||2018-12-29 03:03||2019-07-02 09:18|
|セット||jetwave and clones|
jetwave - ジェットウェーブ (EAB, Euro版 v1.04)
|詳 細||Jet Wave and its clones analog inputs do not respond in game. They however respond fine in test mode. Alternatively, the Left/Right select buttons are used for steering and the T-Center button can be used for acceleration. I'm pretty sure it has always been the case.|
|再現手順||1. Go into test mode and go to I/O Check and test analog controls.|
2. Exit test
3. Insert some games and try to play the game with analog controls mapped.
|追加情報||Originally posted this as a different bug which I thought the game regressed and booted with a "Driving System Error, Error Code 1" but it turned out that was caused when Dips "3 and 4" (shows ingame as "1 and 2") were set to off. Setting these switches on most likely tests all the hardware components. Error Code 1 from what the manual says states that all sensors are on (on actual hardware, they should be off and all sensors show on in mame). It's likely this sensor/motor/drive system is currently unemulated.|
Then again, these "sensors" all showing on could disable analog controls in game or other related errors (edit: they don't. The sensors and analog controls have separate dip settings).