カテゴリ 重要度 ステータス 解決状況 登録日時 最終更新
解決済み修正済み2017-11-01 05:472017-11-02 00:09
 
テスターdemotester担当者Dukeソースeinstein.cpp
バージョン0.191発生バージョン修正バージョン0.192GIT
フラグ
セット einstein
セット詳細
einstein - Einstein TC-01
 
概 要倍密度ドライブのフォーマットに失敗する。
詳 細Notes:

a) Old systems with XtalDOS versions less than 2.x only supports single-sided 40 track drives!

b) New system 5 with XtalDOS 2.x supports single-sided and double-sided 40/80 track drives!
The default set-up under XtalDOS 2.x is for drives 0 and 1 to be single-sided, and drives 2 and 3 to be double-sided (all 40-track)!
(Note: This can be altered as is explained in the Systrem 5 manual, but is not needed for this test.)

c) The System 80 also supports single-sided and double-sided 40/80 tracks drives!
The default set-up is for drives 0 and 1 to be single-sided 40-tracks and drives 2 and 3 to be double-sided 80-tracks!
(Note: This can be altered with "CONFIG" command.)

So here is the list of all possible drive configurations that System 5 and System 80 supports:

Single-Sided, 40-Track (188k) ==> The original 3" drive
Double-Sided, 40-Track (386k)
Single-Sided, 80-Track (386k)
Double-Sided, 80-Track (768k)

In the current MAME/MESS implementation, in the "Machine Configuration" internal menu it is possible to set between Single-Sided or Double-Sided drives!
(all 40-track drives, I guess, so no posibility for 80-track drives)
再現手順- Start the einstein driver as "empty".
- In the "Machine Configuration" internal menu set drives 0 and 1 to be single-sided and drives 2 and 3 to be double-sided. (Press F3 key to reset)
- Mount the System 5 (or System 80) into drive 0 and press "LCtrl + LAlt" keys to boot.
- In the internal menu "File manager" create new disc images: for drive 1 (new_40SS.mfm) and for drives 2 (new_40DD.mfm) as read-write images.
- Type BACKUP command (if System 80 see notes below) and choose to format and follow the instructions.

Notes if System 80:
Run the CONFIG and set drives 0/1 to be single-sided 40-track and drives 2/3 to be double-sided 40-track, save the config! (Note: the disc must be in write-supported format)
Type BACK80 and choose to format and follow the instructions.

- First format the drive 1 that is set as single-sided ... formatting and verifying passes!
- Now try to format the drive 2 that is set as double-sided ... after formatting it shows an error on verifying?

- If you exit from the BACKUP program and type: "DIR 1:" it works fine, but type "DIR 2:" and it shows nothing!
(so formatting the drive 2 as double-sided is currently not working)
追加情報Btw. In the current swlist there are several files with size="432111" and one with size="435183".
HexEditor says that these disks are 40-track double-sided, but as have all sectors equal on both sides are probably baddump by wrongly using SAMDISK tool settings.
(all can be converted to single-sided and will also work fine)
Now, if mount a such disc into drive 1 set as single-sided and type "DIR 1:" it will show the content, but if you mount into drive 2 set as double-sided and type "DIR 2:" it will not show the content, even the disc is double-sided.
 
添付ファイル